Product number: 50140100

Central LED Control Gear PRO-LCG


Weight: 2.39 kg

Availability on request

Pre-wired LED control device - configurator

Please select the one that suits you from the 3 components. The PRO-LCG

  • controls the brake / indicator / tail light as well as the rear fog / reversing light
  • Cable 8 x 1mm²
  • Input side 4.0m open end < / li>
  • Output side 3.0m with 7-pin AMP plugs or 1.5m with 5-pin bayonet
  • 1 LED control device per vehicle
  • available in 12 volts or 24 Volt

The PRO-LCG serves as a control and ballast in front of LED vehicle lights in 12V or 24V on-board networks. It enables the control system in the vehicle to recognize and indicate whether a turn signal function has failed. Furthermore, it prevents incorrect failure messages for other light functions, which are caused by the lower power consumption of the LED lights.

The PRO-LCG must be attached to a sufficiently dimensioned metal base with air circulation so that an operating temperature of approx. 70 ° C is not exceeded.

All connections must be made carefully and watertight.

!!! Make sure that no conventional lamps with light bulbs may be connected to the output of the PRO-LCG !!!